Flower Pattern

If you purchased the Link Bracelet tutorial, thank you. This page covers the flower pattern I use to make bracelets using the links. I hope you find it helpful and inspiring.

What you will need

  • 20 gauge wire dead soft Cut 3 pieces at 4 inches in length
  • Round nose or bail pliers.
  • Flat nose pliers
  • Wire cutters
  • 1 4mm Copper bead
  • 4 3mm copper beads
  • 4 4mm round beads
Take one of the cut wires, and bend it 90 degrees about an inch from the top.
Using your round nose or bail pliers, grab the wire at the bend and wrap the wire around the tip as seen in photo

HINT: Keep all your loops the same size for uniformity

Final Result!

I hope this has helped. If you would like to learn how I make the connectors to create a beautiful bracelet, or necklace, please click here.

Thank yo for stopping by. Join us on Facebook for more or to post your own beautiful creations.

You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply


%d bloggers like this: